Memory Error - Ricoh fi-8040 Operator's Manual

Error Code
—
U7:20
—

Memory Error

If a memory error occurs, the [Error] screen on the touch screen displays one of the following error
codes and the corresponding details and solution.
Error Code
C0:E5
C0:E6
C0:E9
C0:EA
C1:E0
Turn the scanner off then back on.
If the problem still persists, write down the error code, check each item in
Scanner Service Provider (page 248)
this product. Refer to the contact information in the Contact List if supplied with this product, or
refer to the contact information in the Contact for Inquiries section if provided in Safety
Precautions supplied with this product, and then make an inquiry.
Error Details
Scanning has been paused by the
user
Outside designated scan area error
Invalid Command
Error Details and the Solution
Memory error (Front)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code C0:E5
Memory error (Back)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code C0:E6
LSI error (Front)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code C0:E9
LSI error (Back)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
Code C0:EA
LSI error (Initialization failure)
If the problem persists after turning the power back on, please
inform your service provider of the error code.
C1:E0
and then contact the distributor/dealer where you purchased
180
Troubleshooting
Refer to
Scanning Has Been Paused by the
User (page 192)
Outside Designated Scan Area Error
(page 192)
Invalid Command (page 193)
Before You Contact the