Scanning Has Been Paused By The User; Outside Designated Scan Area Error - Ricoh fi-8040 Operator's Manual

When the [Stop] button on the touch screen is pressed during scanning, document feeding stops
and then scanning stops.
If documents remain in the scanner, refer to
documents.

Scanning Has Been Paused by the User

Scanning has been paused by the user.
When the [Pause] button on the touch screen is pressed during scanning, scanning pauses.
To resume scanning, press the [Scan] button on the touch screen.
To stop scanning, press

Outside Designated Scan Area Error

If a paper jam occurs when the bottom edge of the document is detected before the specified area
is scanned with the ADF, the [Error] screen on the touch screen displays one of the following error
codes and the corresponding details and solution.
Error Code
U7:20
When a Paper Jam Occurs (page 175)
on the touch screen.
Error Details and the Solution
U7:20 Error
Outside designated scan area error
Detected the page end before starting scanning.
Please change the scan area, and scan again.
192
Troubleshooting
to remove the