Firmware Update; Network Firmware Update; Backup And Restore Sd Card; Backup Sd Card Procedure - Ricoh Capella-NB1e Service Manual

14 June, 2005

3.2.2 FIRMWARE UPDATE

This machine has one firmware type:
• Network firmware
NOTE: 1) You can keep both firmware programs on the same SD card.
2) Do not put firmware programs from another machine on the SD card
you will use for this machine. You cannot mix multiple machine firmware
programs on the same SD card.
3) You do not need to create a root directory when you update the
firmware for this machine.

Network firmware update

Before you do this procedure, prepare an SD card that contains the required
firmware.
1. Turn off the main power of the machine.
2. Do the "Backup SD card" procedure. (
3. Install the SD card, which contains the required firmware, into the SD card slot
[A].
4. Turn on the main power of the mainframe while holding down the ,  and
 keys together.
5. When "START" is displayed, press the Start button.
6. Follow the procedure displayed on the operation panel to update the network
firmware.
NOTE: "Upgrading complete" is displayed after completing this update
correctly.
7. Turn off the main power, and then remove the SD card.
8. Do the "Restore SD card" procedure. (

3.2.3 BACKUP AND RESTORE SD CARD

Backup SD card procedure

1. Turn off the main power.
2. Install an SD card, which does not have any data, into the SD card slot [A].
3. Turn on the main power.
4. Enter the SP mode (
5. Press  three times consecutively to download the setting data from the
mainframe to the SD card.
6. After completing the setting data backup, turn off the main power, and then
remove the SD card from the SD card slot.
3.2.3 Backup SD card procedure)
3.2.3 Restore SD card procedure)
3.2.1), and then select SP1-017 (Backup SD Card).
11
SERVICE TABLES