Understanding The Boot Window Format - Bay Networks Manager User Manual

Part 4 Control and Status Commands
In this example, the
Pref Load Addr
display values automatically. If you select multiple Annexes whose values
differ, these fields do not contain values. For example, if you select two
Annexes with the same
a warning window will appear and the
Addr,
display a value.

Understanding the Boot Window Format

The window's radio buttons define the type of boot operation. Text
Boot
fields control the boot image, load and dump addresses, time, and message
to users. Annex Manager's standard push buttons activate the command.
This section describes each window element.
Defining Boot Options
You can choose one of the following
• boots selected Annexes as soon as you activate the
Immediate
command.
• accepts a
Delayed
can enter more than one delayed request. However, if you enter
a second request for a time earlier than an existing request, the
selected Annexes will boot at the earlier time and all other
existing boot requests will be deleted.
• saves the current image to the address you enter in the
Dump
Pref Dump Addr
• places an Annex in test mode and begins diagnostic
Diagnostic
tests. When these tests end, the Annex is in ROM Monitor
mode and cannot respond to Annex Manager requests until you
boot it.
Chapter 16
,
Pref Dump Addr
and different values for
Pref Load Addr
Boot Option
at which the boot will occur. You
Boot Time
field.
Annex Manager User Guide
Booting and Resetting Annexes
, and fields
Boot Image
Pref Dump
field will not
Pref Dump Addr
buttons:
16-3