Digital Modem Configuration Parameter Changes; Parameter 4 - Bay Networks 5399 Release Note

Remote Access Software Version 5.3 Release Notes
300115-B Rev. A
12
Digital Modem Configuration Parameter Changes
Bit settings for 17 of the digital modem configuration parameters have
changed; many of the new bit settings support 56K modems. Refer to
Appendix A of the manual Managing Remote Access Concentrators
Using Command Line Interfaces for complete instructions on configuring
and using these parameters.

Parameter 4

Bit 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Value 0 0 0 0 0 0 0 0 0 1 0 1 1 0 1 0
Descr. Unused
Default config_bytes Setting:
Decimal base: 90
Octal base: 0132
Hexadecimal base: 0x5A
Hf: Host Flow Control
00: No flow control
01: Inbound flow control
10: Outbound flow control
11: Inbound and outbound flow control
Mf: Modem Flow Control
00: No flow control
01: Inbound flow control
10: Outbound flow control
11: Inbound and outbound flow control
I: Host Inbound Passthrough
0: Inbound remove
1: Inbound passthrough
O: Host Outbound Passthrough
0: Outbound no translation
1: Outbound translate to inbound
L O I Mf Hf