Table of Contents
Advertisement
Part 3
Customize Mode
Entering Port Types
and Port Numbers
Understanding the Set Window Format
The
window consists of a work area, a message box, a port type button
Set
and port number field, and push buttons. Its format allows you to see and
change current parameter values and to review your work.
Entering Port Information
The parameters you choose in the main window determine whether you
need to enter port, interface, or channel information for the
If you select parameters that require this information, you can select a
port type and enter port or channel numbers in fields located below the
.
Work Area
To select a port type and enter port numbers:
1.
Hold the mouse on the option button that displays
The menu displays
DS0 Channel(s)
2.
Highlight the port type you want and release the button.
You must enter a port type that matches your
selection in the main window. For example, if you choose the
option, you should not select
Port List
3.
For
Async Port(s)
more port numbers or All in the field next to the port type button.
To enter specific ports, separate port numbers with commas or
indicate a range of numbers using dashes. For example, you might
enter
,
,
to specify three ports, or
1
3
8
3 and port 8. For
displays automatically. You cannot change this value.
Chapter 13
Viewing and Changing Parameters
,
Async Port(s)
Printer Port(s), Enet Port(s),
, and
.
DS1 Line(s)
Enet Port(s)
,
, and
Printer Port(s)
DS0 Channel(s)
1-3, 8
, you must enter
Enet Port(s)
Annex Manager User Guide
command.
Set
Async Ports
Parameter Options
Async
here.
, enter one or
to specify ports 1 through
. For
ports,
1
T1
2
.
13-9
Advertisement
Table of Contents
