Chapter 10
Setting Security Values
Selecting Security Window Settings
Selecting Settings
Annex Manager User Guide
10-4
To select new security settings:
1.
Display the
Security
2.
Select new settings.
If the
window first appears with the
Security
Non-modem Ports On
parameter was set to
Manager deactivates security but does not change the
enable_security
3.
Press
Apply
The
Reset Parameters
option from the pull-down menu and if the settings you
Auto Reset
changed require Annex Manager to reset Annexes. If you did not
select
Confirm Auto Reset
notifying you.
Figure 10-2. Reset Parameters Window
window.
and
buttons selected, the
Off
. If you select either
enabled
setting.
.
window appears if you selected the
, Annex Manager resets Annexes without
Part 2
Setup Mode
and/or
Modem Ports
enable_security
button, Annex
Off
Confirm