Software Troubleshooting; Troubleshooting Pim-Sm Issues In The Cli; Navigation; Troubleshooting For No Bootstrap Router - Nortel 8300 Troubleshooting Manual

Software troubleshooting

Use the tasks in this section to troubleshoot connectivity, packet loss, and
performance issues that occur with specific features and functional layers of
the Ethernet Routing Switch 8300.

Navigation

•
•

Troubleshooting PIM-SM issues in the CLI

Use the tasks in this section to troubleshoot the following CLI issues that
occur with the PIM-SM feature on the Ethernet Routing Switch 8300:
Navigation
•
•
•
•
•
•

Troubleshooting for no bootstrap router

Use the following procedure if the network does not designate a bootstrap
router (BSR).
Procedure steps
Step
1
Copyright © 2007, Nortel Networks
.
"Troubleshooting PIM-SM issues in the CLI" (page 39)
"Troubleshooting Split MultiLink Trunking issues" (page 44)
"Troubleshooting for no bootstrap router" (page 39)
"Troubleshooting for no rendezvous point" (page 41)
"Troubleshooting for No (*,G) and (S,G) in the Mroute table" (page 41)
"Troubleshooting for (*,G) setup, No (S,G) in the Mroute Table" (page 43)
"Troubleshooting if traffic does not forward" (page 43)
"Troubleshooting for traffic loss" (page 43)
Action
Ensure that at least one switch within the PIM domain is configured
as the candidate BSR.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
39