116 Troubleshooting tools
Passport-8310:5/config/ethernet/4/1/VCT# test
Figure 18 "vct test command output" (page 116)
configured on port 4/1.
Figure 18
vct test command output
To display VCT information on slot 2, port 9, use the following command:
Passport-8310:5/config/ethernet/4/1/VCT# info
Figure 19 "Config ethernet 4/1 VCT info command output" (page 116)
sample output for this command.
Figure 19
Config ethernet 4/1 VCT info command output
Copyright © 2007, Nortel Networks
.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
shows a VCT test
shows