Nortel 8300 Troubleshooting Manual page 130

130 Troubleshooting tools
Step
1
2
Variable definitions
Variable
info
duration <integer>
interval <integer>
Job aid: Configuration example
This configuration example uses the preceding commands to set the
monitor duration and set the monitor interval. The example also uses the
info command to display the current level parameter settings and next
level directories.
Passport-8310:5#
Passport-8310:5# config cli monitor
Copyright © 2007, Nortel Networks
.
Action
To configure the duration of the monitor command, enter the
following command:
config cli monitor duration <integer>
To configure the interval of the monitor command, enter the
following command:
config cli monitor interval <integer>
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—
Value
Displays current level parameter settings and next
level directories.
Sets the monitor time duration. To clear the display,
type Ctrl/L.
• <integer> is an integer value with a range of 1
to 1800 seconds.
Sets the monitor time interval. To clear the display,
type Ctrl/L.
•
<integer> is an integer value with a range of
1 to 600 seconds