Nortel 8300 Troubleshooting Manual page 113

Figure 15 "Config ethernet 9/1 vct info command output" (page 113)
sample output for the config ethernet <slot|port> vct info
command.
Figure 15
Config ethernet 9/1 vct info command output
Table 14 "VCT tab fields" (page 113)
Table 14
VCT tab fields
Field
Port
PhyType
TestDone
Copyright © 2007, Nortel Networks
.
Description
The port number of the particular port.
The type of the Phy, expressed as a speed. The meanings
of this value are:
• phy100M(1) = 10/100 port
• phy1000M(2) = 1 gigabit port
• phyUnknown
Indicates whether the VCT test is complete or not. When
a test is started by setting StartTest to TRUE, this flag is
immediately set to FALSE. This field is set to TRUE when
the test is complete.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
Using the Virtual Cable Tester 113
describes the VCT tab fields.
shows