Nortel 8300 Troubleshooting Manual page 77

Passport-8310:5 config log transferFile 4# add-IP
10.10.10.10
Passport-8310:5 config log transferFile 4# info
Figure 4 "Config log transferFile 4 info command output" (page 77)
sample output for the config log transferFile 4 info command.
Figure 4
Config log transferFile 4 info command output
Displaying log information
To display log information for the switch, use the following command:
The show log file command uses the following options:
Procedure steps
Step
1
2
3
4
5
Copyright © 2007, Nortel Networks
.
Action
To display log information for the switch, enter the following
command:
show log file
To specify the service for which you want to display information,
enter the following command:
show log file category <value>
To specify the CPU for which you want to display information, enter
the following command:
show log file CPU <value>
To specify the name of the log file for which you want to display
information, enter the following command:
show log file name-of-file <value>
To specify the name of the file to which you want to save the log
information, enter the following command:
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
Displaying and configuring log files 77
shows