166 Troubleshooting configuration examples
Example 6
To change a mirroring port use the following command:
Passport-8310:5/config/diag/mirror-by-port/1#
mirroring-port 5/5
Example 7
To display information about mirrored ports on the switch, use the following
command:
Passport-8310:5 # show diag mirror-by-port
Figure 34 "Show diag mirror-by-port command output" (page 166)
sample output for this command.
Figure 34
Show diag mirror-by-port command output
Copyright © 2007, Nortel Networks
.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
shows