Nortel 8300 Troubleshooting Manual page 72

72 Troubleshooting tools
Step
1
2
3
4
5
6
7
Variable definitions
Variable
level [<level>]
Copyright © 2007, Nortel Networks
.
Action
To write a log file, use the following command:
config log
To show and set the logging level, enter the following command:
config log level <level>
To set the log display on the screen to on or off, enter the following
command:
config log screen [<setting>]
To write the log file with the designated string, enter the following
command:
config log write <str>
To enable logging to the PCMCIA, enter the following command:
config log logtoPCMCIA
To display the current log settings, enter the following command:
config log info
To clear the log file, enter the following command:
config log clear
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—
Value
Shows and sets the logging level. <level> is one
of the following values:
• 0 = Information; all messages are recorded.
• 1 = Warning; only warning and more serious
messages are recorded.
• 2 = Error; only error and more serious
messages are recorded.
• 3 = Manufacturing; this parameter is not
available for customer use.
• 4 = Fatal; only fatal messages are recorded.