54 Troubleshooting tools
Editing existing mirrored or mirroring ports
The Ethernet Routing Switch 8300 supports only one mirroring port. Use
the following procedure to modify an existing mirrored or mirroring port.
Procedure steps
Step
1
2
3
Editing the Mode field values
Use the following procedure to modify an existing entry in the Mode field.
Procedure steps
Step
1
2
3
Copyright © 2007, Nortel Networks
.
Action
From the Port Mirrors dialog box, double click on an entry you want
to modify in the MirroredPort or MirroringPort column heading.
The MirroringPort dialog box appears with the port you clicked to
modify shown selected. See
MirroringPort dialog box
Click on the port you want as a replacement.
Click Ok.
The entry in the Port Mirrors tab is replaced with the new port.
Action
Double click on the entry to display the pop up menu.
A pop up widow displays the following options: Rx, Tx, or Both.
Click on the option you want for replacement.
The Apply button becomes highlighted.
Click Apply to accept the option.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
"MirroringPort dialog box" (page
—End—
—End—
54).