Updating Switch Software - Nortel 4500 Series Overview-System Configuration

6
"RADIUS Authentication Management page" (page 81)
Authentication Management Page in the Web-based Management Interface.
RADIUS Authentication Management page

Updating switch software

Updating switch software is a necessary part of switch configuration and
maintenance. You can update the version of software running on the switch
through either the Web-based Management Interface, Device Manager
(JDM) or the CLI.
Before you attempt to change the switch software, ensure that the following
prerequisites are in place:
•
•
•
•
•
•
Copyright © 2007, Nortel Networks
.
Click Submit.
The switch has a valid IP address.
A Trivial File Transfer Protocol (TFTP) server is on the network that is
accessible by the switch and that has the desired software version
loaded.
If you change the switch software on a Nortel Ethernet Routing Switch
4500 Series 4548-GT-PWR using a USB Mass Storage Device, ensure
that the Mass Storage Device has the desired software version and is
inserted into the front panel USB port.
If you use the CLI, ensure that the CLI is in Privileged EXEC mode.
If you use the Device Manager, ensure that SNMP is enabled.
If you use the Web-based Management Interface, ensure that you
useread/write access.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
Updating switch software 81
—End—
displays the RADIUS
Nortel Networks Confidential