Nortel 8300 Troubleshooting Manual page 104

104 Troubleshooting tools
6
7
8
Table 12 "VCT tab fields" (page 104)
Table 12
VCT tab fields
Field
Ifindex
StartTest
TestDone
Copyright © 2007, Nortel Networks
.
VCT test warning box
Click Yes to configure VCT for these ports. Click No if you want to
discontinue the VCT test.
Click Refresh a few seconds after clicking Apply to view the test
results.
When the test is compete, the StartTest field is set to false and the
TestDone field is set to true. All other fields contain test result data.
Click Close.
Description
The IFindex or port number of the particular port
A read/write binary flag that is set to TRUE to start the test.
When this flag is set to TRUE, the switch immediately sets
it to FALSE and begins the VCT test.
Indicates whether the VCT test is complete or not. When
a test is started by setting StartTest to TRUE, this flag is
immediately set to FALSE. This field is set to TRUE when
the test is complete.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—
describes the VCT tab fields.