Nortel 8300 Troubleshooting Manual page 100

100 Troubleshooting tools
•
Testing a port with the Virtual Cable Tester using Device Manager
Use the following procedure to test a port using the Virtual Cable Tester
(VCT).
Procedure steps
Step
1
2
3
4
5
Copyright © 2007, Nortel Networks
.
"Testing multiple ports using the Virtual Cable Tester using the Device
Manager" (page 103)
Action
In the Device Manager Main window, select the port.
The port is highlighted.
From the Device Manager menu bar, choose Edit, Port.
The Port dialog box appears with the Interface tab displayed.
Click the VCT tab.
The port VCT tab appears. See
Port VCT tab
To start VCT on this port, set StartTest to true.
Click Apply.
The VCT test warning box appears. See
(page 101).
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
"Port VCT tab" (page
"VCT test warning box"
100).