Configuring The Duration/Interval Of The Monitor Commands - Nortel 8300 Troubleshooting Manual

128 Troubleshooting tools
Displaying spanning tree port information Use the following procedure
to display spanning tree port information.
Procedure steps
Step
1
Variable definitions
Variable
extended [<ports>]
main [<ports>]
Configuring the duration/interval of the monitor commands
The monitor commands are self-updating show commands.
Navigation
•
•
Configuring the duration/interval of the monitor commands
using the NNCLI
Use the following procedure to configure the duration and interval of the
monitor commands.
Prerequisites
•
Procedure steps
Copyright © 2007, Nortel Networks
.
Action
To display spanning tree port information, enter the following
command:
show ports info stg
"Configuring the duration/interval of the monitor commands using the
NNCLI" (page 128)
"Configuring the duration/interval of the monitor commands using the
CLI" (page 129)
To use the monitor command, you must be in Global configuration
or Interface configuration mode.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—
Value
Displays additional information about Ethernet
errors for the specified port or for all ports.
Displays basic information about the number
of different types of Ethernet errors for the
specified port or for all ports.