Nortel 8300 Troubleshooting Manual page 164

164 Troubleshooting configuration examples
Example 3
To change the port mirroring mode, use the following command:
Passport-8310:5(config)# port-mirroring 1 mode tx
Example 4
To change a mirrored port, use the following command:
Passport-8310:5(config)# port-mirroring 1 monitor-port
2/2
Example 5
To disable port mirroring on port 1, use the following command:
Passport-8310:5(config)# port-mirroring 1 disable
Example 6
To change a mirroring port, use the following command:
Passport-8310:5(config)# port-mirroring 1 mirror-port
6/7
Example 7
To display information about port-mirror configuration in a switch, use the
following command:
Passport-8310:5(config)# show port-mirroring
Figure 33 "Show port-mirroring command output" (page 164)
output for this command.
Figure 33
Show port-mirroring command output
Copyright © 2007, Nortel Networks
.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
shows sample