Nortel 8300 Troubleshooting Manual page 75

Variable
delete [string
<value>] [pos
<value>]
Job aid: Configuration example
The following example shows how to configure a log filter with an ID of 5
and an action of drop, and display log filters:
Passport-8310:5# config log filter add 5 action drop
Passport-8310:5# config log filter info
Figure 3 "Config log filter info command output" (page 75)
output for the Config log filter info command.
Figure 3
Config log filter info command output
Transferring log files
Use the following procedure to transfer the syslog file.
Procedure steps
Copyright © 2007, Nortel Networks
.
Value
pos <value> is an optional parameter that
specifies the numerical position to insert the new
string. value is a range from 1 to 50 characters.
Removes a filter entry. Optionally, you can specify
it by string or by position.
string <value> is the string the you want to
delete.
pos <value> specifies the numerical position of
the filter string to delete.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
Displaying and configuring log files 75
shows sample