Nortel 8300 Troubleshooting Manual page 68

68 Troubleshooting tools
2
3
4
5
6
Variable definitions
Variable
category <service>
CPU <CPU>
name-of-file
<filename>
save-to-file
<filename>
Copyright © 2007, Nortel Networks
.
To specify the name of the file for which you want to save the log
information, enter the following command:
show logging file save-to-file <filename>
To specify the CPU for which you want to display information, enter
the following command:
show logging file CPU <CPU>
To specify the service for which you want to display information,
enter the following command:
show logging file category <service>
To specify the severity level of the events that you want to display,
enter the following command:
show logging file severity <level>
To display the log file in reverser order (most recent information first),
enter the following command:
show logging file tail
Value
Specifies the service for which you want to display
information. <service> is one of the following
options: SNMP, EAP, RADIUS, RMON, WEB, STG,
IGMP, HW, MLT, FILTER, QOS, SW, CPU, IP, VLAN,
or IPMC.
Use "|" to separate the options.
Specifies the CPU for which you want to display
information.<CPU> is one of the following options:
CPU3, CPU4, or CPU5.
Use "|" to separate the options.
Specifies the name of the log file that you want to
display. <filename> is the name of the file.
Specifies the name of the file to which you want to
save the log information. <filename> is the name
of the file.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—