Nortel 8300 Troubleshooting Manual page 91

Variable definitions
Variable
host <id>
Displaying information about syslog features
Use the following procedure to display information about the syslog features
enabled on the switch.
Procedure steps
Step
1
Variable definitions
Variable
host <id>
Job aid: Example
This example uses the show syslog command to display general
information about the system log and to display information about a
specified host.
Figure 6
Show syslog command output
Copyright © 2007, Nortel Networks
.
Value
The syslog host ID. The range is 1 to 10.
Action
To display information about the syslog features enabled on the
switch, enter the following command:
show syslog [host <id>]
If the host ID is entered, then system log information for the specified
host is displayed.
Value
The syslog host ID. The range is 1 to 10.
Nortel Ethernet Routing Switch 8300
Troubleshooting
NN46200-704 01.01 Standard
4.0 29 October 2007
—End—
Using syslog 91