C Commonly Used Commands For Maintenance; Table C-1 Commonly Used Commands For Maintenance - Nortel Secure Router 8000 Series Routine Maintenance

Nortel Secure Router 8000 Series
Routine Maintenance
C
T able C-1 show
T able C-1 Commonly used
Command
dir [ /all ] [ filename ]
display bgp [ vpnv4 vpn-instance
vpn-instance-name ] peer [ ipv4-address ]
[ log-info | verbose ]
display clock
display cpu-usage [ slave | configuration ]
display current-configuration
[ configuration [ configuration-type ] |
controller | interface interface-
[ interface-number ] ] [ | { begin | exclude |
include } regular-expression ]
display fib [ slot-id ] statistics
display device [ abnormal | slot-id ]
display ftp-server
display interface [ interface-type
[ interface-number ] [ | { begin | exclude |
include ] regular-expression ]
Issue 5.3 ( )
19 May 2009
Commonly Used Commands for
s the commonly used commands f
commands for maintena
type
Nortel Networks Inc.

C Commonly Used Commands for Maintenance

Maintenance
or maintena nce.
nce
Function
Displays the information on the specified
file or directory in the storage device of the
router.
Displays BGP peer.
Displays the information of the clock.
Displays the statistics and configurations
of CPU usage.
Displays the valid parameters of the router.
Display s the total number of the FIB
entries.
Display s the basic information about the
router.
Displays the parameters of the FTP server
in use.
Displays the running status and statistics of
an interface.
C-1