Configuring The Keepalive Retry Interval; Configuring The Keepalive Transmit-Interval; Configuring Pmtu; Configuring Df Bit - Nortel Secure 4134 Configuration

Configuring the keepalive retry interval
Configure the number of seconds between the DPD retries, in multiples of
10 seconds. Default is 10 seconds.
Procedure steps
Step
1
2
3
Configuring the keepalive transmit-interval
Configure the keepalive transmit interval.
Procedure steps
Step
1
2
3
Configuring PMTU
Configuring DF bit
Configure the value of the Don't Fragment (DF) bit for an interface.
Copyright © 2007, Nortel Networks
.
Action
To enter the configuration mode, enter:
configure terminal
To specify crypto configuration for IPsec and IKE, enter:
crypto
To configure the disable dead peer detection keepalive retry interval,
enter:
keepalive retry-interval <retry-interval>
Action
To enter the configuration mode, enter:
configure terminal
To specify crypto configuration for IPsec and IKE, enter:
crypto
To configure the disable dead peer detection keepalive transmit
interval, enter:
keepalive transmit-interval <10-3600>
Nortel Secure Router 4134
Security — Configuration and Management
NN47263-600 01.02 Standard
10.0 3 August 2007
Configuring PMTU
—End—
—End—
163