Changing The Film Type Of The Lower Tray - AGFA Drystar 4500 Reference Manual

Changing the Lower tray settings

Changing the film type of the lower tray

Perform steps 1 and 2 of the
1
page 57.
On the Change settings menu, press the Down key twice, followed by the
2
Confirm key to select 'Lower tray'.
The 'Lower input tray' screen is displayed:
Press the Confirm key to select 'Film type'.
3
The 'Film type' screen is displayed:
1*Drystar DT1B
2 Drystar DT1C
Press the Up/Down arrow keys to select the desired film type.
4
Press the Confirm key to store the data, or the Escape key to quit the procedure
5
without any changes.
If you have stored the data, the following screen is displayed:
2800E EN 20050215
'Accessing the Change settings menu'
D 4500 R
RYSTAR EFERENCE MANUAL
procedure on
Advanced operation (key-operator mode)
65