D
4500 R
RYSTAR
EFERENCE MANUAL
Saving the configuration
A screen will ask you to insert the back-up floppy:
Insert the floppy disk.
1
The drive is located at the rear of the printer.
For the back-up, a blank floppy disk is required (formatted, IBM-compatible,
2HD).
Press the Confirm key to continue.
2
The 'Saving configuration' screen is displayed.
D:/<path><filename>
A:/<path><filename>
The printer saves the configuration on the floppy disk.
When the writing process has finished, the following screen is displayed:
132
Advanced operation (key-operator mode)
2800E EN 20050215