AGFA Drystar 4500 Reference Manual page 125

Entering the printer network settings
An instruction screen will show the information you need to complete this
part of the installation:
Press the Confirm key to continue.
1
The 'Enter printer IP-address' screen is displayed:
If the IP-address has already been assigned, it will be shown on the display.
When no DHCP server is available and when the IP address of the printer has never
been set, the printer IP address will be set to the APIPA address 169.254.10.10.
Press the Up/Down arrow keys to increment/decrement the numbers. Press the
2
Left/Right arrow keys to move through the fields.
Refer to
Note that blank spaces will not be filled in.
Example: If the IP-address is 120.000.120.120, then the data entry should be as
follows:
2800E EN 20050215
'Data entry' on page 25.
12 .00 .12 .12
D 4500 R
RYSTAR EFERENCE MANUAL
e.g. 10.233. 93. 46
Advanced operation (key-operator mode)
125