AGFA Drystar 4500 Reference Manual page 126

D 4500 R
RYSTAR EFERENCE MANUAL
Example: If the IP-address is 120.0.120.120, then the data entry should be as follows:
Press the Confirm key to continue, or the Escape key to return to the previous
3
step.
The 'Enter Netmask' screen is displayed:
Only necessary in case of subnets!!
If the netmask has already been assigned, it will be shown on the display.
When no DHCP server is available and when the subnet mask of the printer has
never been set, the printer subnet mask will be set to the APIPA address
255.255.0.0.
Press the Up/Down arrow keys to increment/decrement the numbers. Press the
4
Left/Right arrow keys to move through the fields.
Refer to
Note that blank spaces will not be filled in.
Example: If the netmask is 120.000.120.120, then the data entry should be as follows:
Only necessary in case of subnets!!
Example: If the netmask is 120.0.120.120, then the data entry should be as follows:
Only necessary in case of subnets!!
126
Advanced operation (key-operator mode)
12 . .12 .12
'Data entry' on page 25.
12 00 12 12
12 12 12
e.g. 255.255.252. 0
Blinking
2800E EN 20050215