AGFA Drystar 4500 Reference Manual page 208

D 4500 R
RYSTAR EFERENCE MANUAL
Drystar 4500: Determination of Operating Levels
Imager Type: __________
Film Type: ____________
Densitometer
Step 1: Print QC Test images on five consecutive days. Record the optical densities
measurements in the tables below. After five days, average the values to determine
the operating (aim) levels for each of the parameters.
Month
Day
Initials
Low Density
Mid Density
High Density
Average of 5 Values = operating (aim) level "High Density"
Step 2: Copy the operating (aim) levels to Charts 2A/B ('Daily Density Control Chart')
208
Quality Control Charts
Serial #: _________________
Emulsion #: ______________
Internal: _________________ (default selection)
Day 1
Average of 5 Values = operating (aim) level "Low Density"
Average of 5 Values = operating (aim) level "Mid Density"
Day 2 Day 3
Chart 1
Date ____________________
Day 4 Day 5
2800E EN 20050215