D
4500 R
RYSTAR
EFERENCE MANUAL
Setting up the connection
Setting up a direct link (configuration with crossed network
cable)
To set up a direct link, you have to follow two procedures:
Attribute a fixed IP address to the PC,
•
Switch off all proxy setting in the browser.
•
When setting up a link, bare in mind the following important hints:
Always make the physical connection first,
•
Depending on the PC and/or Operating System, a reboot may be necessary
•
in order to make the new configuration work.
Attributing a fixed IP address to the PC
Go to Settings via the Start menu of Windows and click Control Panel.
1
The Control Panel menu will appear.
150
Controlling the Drystar 4500 via the browser
2800E EN 20050215