AGFA Drystar 4500 Reference Manual page 118

D 4500 R
RYSTAR EFERENCE MANUAL
Repeat steps
16
hard disk.
When all the files have been copied from the last floppy disk, the following screen is
displayed:
Remove the last floppy disk and press the Confirm key.
17
In case the software requires a reset, the following screen will be displayed:
Press the Confirm key to reset the printer.
18
In case the software requires no reset, the following screen will be displayed:
Press the Confirm key to continue. You will return to the 'Installation' screen.
19
118
Advanced operation (key-operator mode)
14 and 15 until all floppy disks have been copied onto the
2800E EN 20050215