Data entry
When entering numerical or alphanumerical data, always adhere to the
following principles:
Only (alpha)numerical data can be entered.
•
During the data entry, the field is displayed in reverse mode.
•
Increment the number in a(n) (alpha)numerical entry field by pressing the
•
Up key. Transition from 9 to 0 of one figure will also increment the next
figure to the left, respecting the valid limits of the range.
Decrement the number in a(n) (alpha)numerical entry field by pressing
•
the Down key. Transition from 0 to 9 of one figure will also decrement the
next figure to the left, respecting the valid limits of the range.
Move the entry position in a(n) (alpha)numerical entry field from right to
•
left by pressing the Left key.
Move the entry position in a(n) (alpha)numerical entry field from left to
•
right by pressing the Right key.
Press and hold down a key to repeat arrow key actions.
•
To accept an entry in a menu, press the Confirm key.
•
A short beep acknowledges and terminates the entry.
•
2800E EN 20050215
D
4500 R
RYSTAR
EFERENCE MANUAL
Introducing the Drystar 4500
25