AGFA Drystar 4500 Reference Manual page 92

D 4500 R
RYSTAR EFERENCE MANUAL
On the 'Image quality' screen, press the Down key twice, followed by the
6
Confirm key to select 'Dmax'.
The 'Dmax (maximum density)' screen is displayed:
<Modality name>
*2.80
2.85
2.90
2.95
The listed densities are densities of the default densitometer.
All maximum densities are selectable starting from 2.75 until 3.90 in steps of 0.05
units. The activated setting is marked with an *.
The maximum density will be limited to the maximum density of the media.
Press the Up/Down key to select the desired maximum density setting (the target
7
density is 2.80) for this modality.
Press the Confirm key to store the data, or the Escape key to quit the procedure
8
without any changes.
92
Advanced operation (key-operator mode) 2800E EN 20050215