AGFA Drystar 4500 Reference Manual page 68

D 4500 R
RYSTAR EFERENCE MANUAL
Select 'no' if you do not wish to accept the changed settings. Press the Confirm
6
key. You will return to the Main menu.
Select 'yes' if you wish to accept the changed settings. Press the Confirm key.
The following screen is displayed:
If the film package in the lower input tray matches the description on the
7
screen, select 'yes' and press the Confirm key. You will return to the 'Lower input
tray' setting display and the film format change procedure ends here. If the film
package in the lower input tray does not match the description on the screen,
select 'no' and press the Confirm key.
The following screen is displayed:
Open the upper input tray.
8
The following screen is displayed:
Perform the mechanical modification as described in
9
of the lower tray'
Insert a film package that matches the description on the display and close the
10
input tray. You will return to the 'Lower input tray' setting display.
68
Advanced operation (key-operator mode)
DT1C
8x10"
normal
DT1C
8x10"
normal
on page 162.
'Changing the film format
2800E EN 20050215