AGFA Drystar 4500 Reference Manual page 94

D 4500 R
RYSTAR EFERENCE MANUAL
Printing test images from the hard disk
Test images are useful for checking the print quality. The Drystar 4500 offers
a number of built-in test images stored on the hard disk.
Perform steps 1 to 2 of the
1
page 93 to select the 'Print image' screen.
On the 'Print image' menu, press the Confirm key to select 'Test image'.
2
The 'Select test image' screen is displayed:
1 smpte.tif
2 smpte_kan.tif
3 smpte_300.tif
4 smpte_ls.tif
Press the Up/Down arrow keys to select the desired test image, followed by the
3
Confirm key.
Define the input tray for printing.
4
The 'Select input tray' screen is displayed:
Press the Up/Down arrow keys to select the desired input tray, followed by the
5
Confirm key.
The 'Number of copies' screen is displayed:
Press the arrow keys to increment/decrement the number. Press the Left/Right
6
key to move through the field.
For more info, refer to
94
Advanced operation (key-operator mode)
'Accessing the Print images menu'
'Data entry' on page 25.
procedure on
2800E EN 20050215