AGFA Drystar 4500 Reference Manual page 86

D 4500 R
RYSTAR EFERENCE MANUAL
Changing general image quality settings - Default densitometer
Perform steps 1 and 2 of the
1
page 57.
On the 'Change setting' screen, press the Down key four times, followed by the
2
Confirm key to select 'Image quality'.
The following screen will appear:
2 <Modality name>
3 <Modality name>
4 <Modality name>
Press the Confirm key to select 'General'.
3
The 'General settings' screen is displayed:
Press the Down key once, followed by the Confirm key to select 'Default
4
densitometer'.
The 'Select Default densitometer' screen is displayed:
* Macbeth TR924
Gretag
X-Rite 301
X-Rite 310
X-rite 331
X-rite 341
Press the Up/Down key to select the default densitometer.
5
Press the Confirm key to store the data, or the Escape key to quit the procedure
6
without any changes.
All shown densities will vary slightly according to the densitometer selection.
86
Advanced operation (key-operator mode)
'Accessing the Change settings menu' procedure on
2800E EN 20050215