AGFA Drystar 4500 Reference Manual page 97

Press the Up/Down arrow keys to select the desired TIFF-file, followed by the
5
Confirm key.
Define the input tray for printing.
6
The 'Select input tray' screen is displayed:
Press the Up/Down arrow keys to select the desired input tray, followed by the
7
Confirm key.
The 'Number of copies' screen is displayed:
Press the arrow keys to increment/decrement the number. Press the Left/Right
8
key to move through the field.
For more info, refer to
Press the Confirm key to confirm the number of copies.
9
The 'Copying and Queuing file' screen will be shown to indicate to the operator that
the (printing) action is accepted and in progress:
<filename>
After about 20 seconds the following screen appears:
Remove the floppy disk from the drive and press the Confirm key to continue.
10
The print job is stored in the print queue.
2800E EN 20050215
'Data entry' on page 25.
D 4500 R
RYSTAR EFERENCE MANUAL
Advanced operation (key-operator mode)
97