AGFA Drystar 4500 Reference Manual page 84

D 4500 R
RYSTAR EFERENCE MANUAL
Changing the image quality settings
Changing general image quality settings - Film calibration
Perform steps 1 and 2 of the
1
page 57.
On the 'Change setting' screen, press the Down key four times, followed by the
2
Confirm key to select 'Image quality'.
The following screen will appear:
2 <Modality name>
3 <Modality name>
4 <Modality name>
Press the Confirm key to select 'General'.
3
The 'General settings' screen is displayed:
Press the Confirm key to select 'Film calibration'.
4
The 'Select default for film calibration' screen is displayed:
*
This setting is by default set to ON and will apply to every modality.
The current setting is marked with an *.
84
Advanced operation (key-operator mode)
'Accessing the Change settings menu'
On
Off
procedure on
2800E EN 20050215