AGFA Drystar 4500 Reference Manual page 63

Select 'no' if you do not wish to accept the changed settings. Press the Confirm
6
key. You will return to the Main menu.
Select 'yes' if you wish to accept the changed settings. Press the Confirm key.
The following screen is displayed:
Insert the correct film type in the upper input tray and close the input tray.
7
After you have changed the film type and inserted new films, you have to
perform a film calibration procedure. Refer to
procedures'
2800E EN 20050215
on page 105.
D 4500 R
RYSTAR EFERENCE MANUAL
'Performing the calibration
Advanced operation (key-operator mode)
63