AGFA Drystar 4500 Reference Manual page 58

D 4500 R
RYSTAR EFERENCE MANUAL
When the settings have been changed, the 'accept modifications' window is
displayed:
Select 'no' if you do not wish to accept the changed settings. Press the Confirm key.
You will return to the Main menu.
Select 'yes' if you wish to accept the changed settings. Press the Confirm key. You will
return to 'Change settings' screen.
If you want to change other settings, change them first.
3
If you do not want to make other changes, press the Escape key two times to
4
return to the main menu. You will be asked to back up the new configurations
on a floppy disk.
The 'Update back-up' screen is displayed:
If you want to save the configuration on the back-up floppy, select 'yes' and press the
Confirm key. The printer will now enter the
99).
If you only want to save the configuration on the printer's hard disk, select 'no' and
press the Confirm key. You will return to the 'main menu'.
58
Advanced operation (key-operator mode)
'Save configuration procedure' (see page
2800E EN 20050215