Switching Off The Drystar 4500 - AGFA Drystar 4500 Reference Manual

D 4500 R
RYSTAR EFERENCE MANUAL

Switching off the Drystar 4500

When you want to switch off the printer, it is recommended to follow the
procedure as described below, to make sure that any pending jobs are
correctly finished.
Do NOT press the Power/Reset button without first pressing the Stop
button when the Drystar 4500 is busy printing a film.
Do NOT open the printer or an input tray before performing this
procedure.
Press the Stop button to initiate the stop sequence.
1
TOP
The printer will finish a print job if it is already activated. Other jobs, currently being
calculated or in waiting status will not be printed.
The display shows the progress of the print job, acknowledging that the stop sequence
has been initiated:
<Modality name>
STOP SEQUENCE IS INITIATED
Wait until the following screen is displayed:
2
You can power off the printer or
enter the key-operator menu
Press the Power/Reset button to switch off the Drystar 4500.
3
OWER
28
Introducing the Drystar 4500
10:21:34 PRINTING
Blinking
Blinking
2800E EN 20050215