AGFA Drystar 4500 Reference Manual page 41

Remove the perforated protective sheet from the input tray.
3
LOAD <Film Type Description>
Open a film pack, making sure that the film type corresponds with both:
4
The film type description on the display (refer to the screen above).
•
The film type as indicated on the label on the film tray.
•
DRYSTAR DT 1 B 8x10"
You can find the film type on the film packaging. The label may show some
additional characters after the film type, e.g. 'DRYSTAR DT 1 C'. Those characters
are not relevant for the printer settings, and you can ignore them.
When you have to load a film of another type, you will have to change the film type
settings first. Refer to
2800E EN 20050215
'Changing the configuration settings'
D 4500 R
RYSTAR EFERENCE MANUAL
Blinking
on page 56.
Basic operation (operator mode)
41