AGFA Drystar 4500 Reference Manual page 87

Changing Image quality setting for a modality - Selecting a lookup
table
Perform steps 1 and 2 of the
1
page 57.
On the 'Change settings' screen, press the Down key four times, followed by the
2
Confirm key to select 'Image quality'.
The following screen will appear:
2 <Modality name>
3 <Modality name>
4 <Modality name>
Press the Up/Down key to select the modality for which you want to change the
3
image quality settings, and press the Confirm key.
The 'Image quality' screen for the selected modality is displayed:
<Modality name>
Do one of the following:
4
If you want to attribute the default profile, select 'Profile default' and press the
•
Confirm key.
You return to the screen of step 2.
If you want to add a custom profile, select 'Select other' and press the Confirm key.
•
Proceed with step 5.
The 'Image quality' screen for the selected modality is displayed:
5
<Modality name>
2800E EN 20050215
'Accessing the Change settings menu'
D 4500 R
RYSTAR EFERENCE MANUAL
procedure on
Advanced operation (key-operator mode)
87