Switching On The Drystar 5302 - AGFA Drystar 5302 User Manual

D 5302 U
RYSTAR SER MANUAL

Switching on the Drystar 5302

Before switching on the Drystar 5302, read the safety instructions. Refer to
precautions'
Follow the procedure below to ensure proper startup of the Drystar 5302 and
to check that everything is working correctly.
Check that the power cord is plugged in and then switch on the printer by
1
pressing the Power/Reset button.
On the display, the following message is displayed. After a short while, a progress
indicator will show the proceeding of the self-test.
Please WAIT
Self Test
proceeding
If anything goes wrong during the self-test, refer to
•
the Drystar 5302 Reference manual.
30
Introducing the Drystar 5302
on page 9.
62%
'Startup errors' on page
2831A EN 20041201
'Safety
172 of