D
5500/5503 R
RYSTAR
EFERENCE MANUAL
Switching on the Drystar 5500
Before switching on the Drystar 5500, read the safety instructions. Refer to
'Security precautions'
Follow the procedure below to ensure proper start-up of the Drystar 5500 and
to check that everything is working correctly.
Check that the power cord is plugged in and then switch on the printer by
1
pressing the Power button.
On the display, the following message is displayed. After a short while, a progress
indicator will show the proceeding of the self test.
34
Introducing the Drystar 5500
on page 17.
2900H EN 20071108