Power Supply Cooling Fan Motor (M4)
1.
Remove the Right Cover. See
2.
Disconnect the connector (PJ4A) [2] from the (PWB-A) Engine Control Board [1].
3.
Unlock tabs and remove the Power Supply Cooling Fan Motor [3].
Ventilation Fan Motor (M6)
1.
Remove the Right Cover. See
2.
Remove the harness from the wiring saddle [3]and disconnect the connector [2] of the
Ventilation Fan Motor [1].
Phaser® 6120 Color Laser Printer Service Manual
Right Cover
on page 5-6.
[2]
4139fs2039c0
4139fs2040c1
Right Cover
on page 5-6.
[1]
[3]
4139fs2041c1
5-28
Disassembly/Assembly Procedures
[1]
[3]
[2]