Controls System Maintenance; Adjusting The Traction Cable - Toro Greensmaster Flex 1021 Operator's Manual

Controls System
Maintenance
Adjusting the Traction
Cable
Adjust the traction cable to achieve a gap of 1.1 mm
(0.045 inch) between the friction disc and the pressure
plate.
1. Access the friction disc and pressure plate by
removing the clutch cover
Figure 29
1. Clutch cover
2. Loosen the jam nuts and adjust the traction
cable so that a 1.1 mm (0.045 inch) gap is
between the friction disc and the pressure plate
(Figure 30 and Figure
(Figure 29).
g274480
2. Bolt
31).
1. Traction cable
26
Figure 30
2. Jam nut
g309987