Wiring Examples (For F3Sg-Sr/Pg); Non-Muting System Wiring Examples; Auto Reset Mode With Optical Synchronization And Edm Unused; Unused - Omron F3SG-PGA-A User Manual

6-2. Wiring Examples (for F3SG-SR/PG)

Examples of a motor control system using the F3SG-SR/PG are shown below. This chapter shows examples
equivalent to up to PLe, Category 4 (ISO 13849-1). This does NOT mean that the combination of a system
can always achieve the performance levels and categories under all the similar conditions and situations.
Conformity to the performance levels and categories must be assessed as a whole system. When using
F3SG-SR/PG for performance levels and safety categories, perform the installation, inspection, and
maintenance properly, and be sure to confirm the conformity as a whole system.

6-2-1. Non-Muting System Wiring Examples

6-2-1-1. Auto Reset Mode with Optical Synchronization and EDM Unused

F3SG-SRA
F3SG-SRB
[Wiring Example (F3SG-SR and F3SG-PGA-A/-L)]
F39-JG†C-L
[Wiring Example (F3SG-PGA-C)]

F3SG-PGA-A/-L

F3SG-PGA-C
F39-JG†C-D
Input/Output Circuit and Applications


Intelligent Tap
Wiring for NPN *1
*7
IN1 IN2
Safety controller
*5 *6
Intelligent Tap
F3SG-JG†C-D
Wiring for NPN *1
*7
IN1 IN2
Safety controller
*5 *6
Not needed
24 VDC
24 VDC
Not needed
24 VDC
24 VDC
F3SG-SR/PG
User's Manual
E
383