Omron F3SG-PGA-A User Manual page 302

Setting with SD Manager 3
No.
1 Error Log Information
(Receiver)
2 Error Log (Emitter) *
3 Show error descriptions
4 Save maintenance
information
* The error log information of the emitter is displayed only when the sensor is connected in the Wired Synchronization.
• Refer to 8-1-2. LOCKOUT State for more information on the error codes and descriptions.
• Refer to 2-27-4. Power-ON Time for more information on the accumulated power-on time.
• Error logs are only displayed for a sensor segment selected in the Target sensor section.
• Up to 50 past errors can be recorded. Up to last five logs are displayed without logging in.
• When configuring F3SG-SR in a cascade connection, select a desired sensor segment from the [Target sensor] button
For F3SG-PGA-C, the error log information of the emitter/receiver is displayed as classified into the internal emitter
function and receiver function.
F3SG-SR/PG
272
User's Manual
Function
Shows error logs including error codes, error descriptions and accumulated power-on time
at the time when errors occurred, with the most recent errors first for the receiver.
Shows error logs including error codes, error descriptions and accumulated power-on time
at the time when errors occurred, with the most recent errors first for the emitter.
Click an error to show details, cause and measures of the event.
Saves error and warning logs, Intelligent Tap log, power-on time, accumulated power-on
time, load switching frequency and accumulated load switching frequency as a .csv file.
in the top right corner of the screen.
Description